Meridian DSP 8000 XE VC Floorstanding Centre Speaker

Performance Frequency response in-room 20Hz – >20kHz ±3dB (for inputs at 44.1kHz or 48kHz) ‘3 1/2-way' crossover system Linear-phase mid–top crossover; 6th-order Linkwitz-Riley bass–mid crossover Output >118dB spl @ 1m on music material Noise less than 15dB spl Overall distortion typically <0.02% at any frequency or level   Inputs SpeakerLink balanced digital (2ch, RJ45) S/PDIF unbalanced digital (2ch, phono) 32kHz–96kHz sampling rates Audio Processing FIFO memory buffer input for the lowest possible jitter from almost any source Four 24-bit D/A converters 3x150W amps on bass (1 amp per driver pair) 2x150W amps on midrange and tweeter All upsampling and processing is performed a 150MHz digital signal processor (DSP) Construction Two separate enclosures: mid/top and bass. Horizontally opposed and profiled bass system introduces minimal vibration to the mid/top enclosure 6 x 200mm long-throw bass drivers 1 x 160mm polypropylene (TPX) mid driver in separate enclosure 1 x 25mm dome tweeter, silver wire, short horn-loaded with protective grille Black or silver gloss piano-lacquer with glass front bass cabinet Also available in other colours to special order Dimensions 1350mm (53.2in) H, 400 (15.7) W, 528 (20.8) D – weight 105kg (231lb) each Control Rear-panel controls for Power On/Off. Full control via MSR and RS232 SpeakerLink carries Comms, serial and balanced digital audio via RJ45/CAT 5 Front display Multi-character display with system lights Power 20W standby, 920W max